Great IPTV on MAG Box: Portal Setup Step by Step
Set up Great IPTV on a MAG box: find the MAC address, get it activated, enter the portal URL, and fix 'portal not found' and loading errors.
Quick answer
To set up Great IPTV on a MAG box, send us the box's MAC address (on the label underneath, starting 00:1A:79), wait for activation, then go to Settings → System settings → Servers → Portals, enter the portal URL from your welcome email as Portal 1, save and restart the box. The channel menu appears after the reboot.
On this page (12 sections)
- What do you need before you start?
- How do you find the MAC address?
- How do you enter the portal on a MAG box?
- Which MAG settings help?
- What should you do if the portal doesn't load?
- How do you use the MAG portal menu?
- Can a MAG box use Wi-Fi?
- How do you reset a MAG box if it gets stuck?
- Can you move your subscription to a new MAG box?
- Is a MAG box still a good choice?
- Can you use your MAG subscription on other devices too?
- Next steps
MAG boxes are simple set-top boxes made for IPTV: you plug them into the TV, enter one portal address, and they show a menu of channels and movies with their own remote. Setting up Great IPTV on a MAG box takes about ten minutes, plus a short wait while we activate the box.
The one difference from other devices: MAG boxes don't use a username and password. Your subscription is linked to the box's MAC address.
What do you need before you start?
- A MAG box connected to the TV by HDMI and to the router, preferably with a network cable.
- The box's MAC address, printed on the label underneath and starting with
00:1A:79. - A Great IPTV trial or plan with MAG activation. Mention "MAG" when you order or request the free trial.
- The portal URL from your welcome email, which we send once the MAC is activated.
- Live channels
- 38,000+
- Movies & series
- 300,000+
- Free trial
- 24 hours
- Plans from
- $13/month
- Connections
- 1–5 screens
- Login types
- M3U · Xtream Codes · MAG portal
- Activation
- 5–30 minutes
- Refund window
- 7 days
How do you find the MAC address?
There are two places:
- The label under the box or on its back, marked MAC.
- On screen: Settings → System information (or "Info" on some models) shows the MAC address.
It looks like 00:1A:79:XX:XX:XX. Send it to us exactly as shown, with the colons, in the order form notes, the trial form, or on WhatsApp. A photo of the label works too and avoids typos.
Need a login to follow along? Start a 24-hour free trial — no card needed.
Get the free trialHow do you enter the portal on a MAG box?
- Switch on the box and wait for the main menu or the portal loading screen.
- Open Settings. Press the SETUP / SET button on the remote, or choose Settings from the menu.
- Go to System settings → Servers → Portals.
- Enter Portal 1 name. Type
Great IPTV. - Enter Portal 1 URL. Type the portal address from your welcome email exactly, including
http://and the ending. - Save with the OK button, then press Exit until you're back at the settings menu.
- Restart the box. Choose Restart portal, or unplug the power for ten seconds.
- Wait for the portal to load. The Great IPTV menu appears with TV, Video Club and Settings sections.
MAG portal settings (example layout — use your own values)
- Portal 1 name
Great IPTVAny label- Portal 1 URL
http://your-portal-address/c/Exactly as in your email- MAC address
00:1A:79:XX:XX:XXSent to us for activation
Which MAG settings help?
- Time zone and NTP: Settings → System settings → Servers → General: set the NTP server (for example
pool.ntp.org) and your time zone. A wrong clock is the most common cause of an empty TV guide on MAG boxes. - Video output: Settings → Video: match the output resolution to your TV (1080p or 4K on 4K-capable models) and set the frame rate to Auto if available.
- Wired network: Settings → Network → Wired (Ethernet) → Auto (DHCP).
- Software update: Settings → Software update. Updated boxes handle large channel lists better.
- Buffer size: some portals offer a buffer setting under Playback; a larger buffer smooths unstable connections.
What should you do if the portal doesn't load?
- "Portal not found" or a blank loading screen: retype the portal URL character by character. Check
http://, slashes and the ending. - "STB blocked" or "Authorization failed": the MAC address isn't active yet or has a typo. Send us a photo of the label.
- No network: go to Settings → Network → Network status. If the box has no IP address, check the cable and restart the router.
- Loading stops at a percentage: restart the box and router. If it repeats, a factory reset (Settings → Reset settings) and re-entering the portal often helps.
- Buffering: use a cable rather than Wi-Fi and see the buffering guide.
- Empty guide: set NTP and the time zone as above, then restart. See the EPG guide.
Stuck on a step?
Setting up a MAG box? Send us a photo of the MAC label and of any error on screen.
How do you use the MAG portal menu?
Once the portal loads, the menu usually has these sections:
- TV: live channels by category. Press OK on a channel to play; press OK again during playback for the channel list.
- Video Club / VOD: movies and series with posters. Navigate with the arrows and press OK to play.
- TV guide: the EPG, available from the TV section with the guide or EPG button on the remote.
- Favourites: press the F or Fav button on a highlighted channel to add it; open the Favourites category to see your list.
- Settings: parental controls, video output and portal-specific options.
The remote's Menu button opens options during playback, such as audio track and aspect ratio. If the picture is stretched, change the aspect ratio there.
Can a MAG box use Wi-Fi?
Some MAG models have built-in Wi-Fi, and others accept a USB Wi-Fi adapter. Go to Settings → Network → Wireless (Wi-Fi), pick your network and type the password. It works, but a network cable is much more reliable on MAG boxes, which have modest Wi-Fi hardware. If the router is far away, a powerline adapter gives you a wired connection without running cable through the house.
How do you reset a MAG box if it gets stuck?
If the box freezes on loading or the menus misbehave after an update:
- Restart the box from the power supply.
- If it persists, open Settings → System settings → Reset settings (some models call it "Default settings").
- After the reset, set up the network, time zone and portal URL again as described above.
A reset doesn't change the MAC address, so the activation stays valid.
Can you move your subscription to a new MAG box?
Yes. Send support the new box's MAC address and your order ID. We move the activation, then you enter the same portal URL on the new box. The old box stops working on the portal, so do it when the new one is ready.
Is a MAG box still a good choice?
MAG boxes are reliable, simple and family-friendly: one remote, no apps to manage, no accidental settings changes. Their downsides are slower menus on older models, fewer features than apps like TiviMate, and the login being tied to one box. If you already have one, it works well with Great IPTV. If you're buying new, an Android TV box or a Firestick offers more for the money.
Can you use your MAG subscription on other devices too?
The MAG portal only works on the box whose MAC is activated. If you also want to watch on a phone or laptop, ask us for the Xtream Codes details for your plan. The same connection rules apply: each screen playing at the same time uses one connection, so a phone and the MAG box together need a 2-connection plan. See the connections guide.
Great IPTV · 12 Months
$69 USD for 1 screen
$5.75/month · save 56% vs monthly · 7-day refund window
Next steps
Set the time zone, add your favourite channels in the portal menu, and read the login guide to understand MAG, Xtream and M3U logins.
Frequently asked questions
Where do I find my MAG box MAC address?
Why does my MAG box say 'Portal not found'?
Can I use a MAG login on another device?
Which MAG models work?
Do I need to activate a new box if I replace mine?
Written by
Setup guides & customer support
We are the small team behind GreatIPTV.blog. We sell and support Great IPTV subscriptions, and every day we help customers install the service on Firesticks, smart TVs, phones and MAG boxes over WhatsApp. These guides are written from those conversations: each one is checked on the device it describes and corrected when an app changes a menu.
How we write and test our guides